LAGARD Basic II CUTSHEET [.pdf format] LaGard has re-designed the popular LGBASIC Angular Entry for ease of installation. The LGBASICII installs in the same slide on fashion used by the SAFEGARD entry. The LGBASICII is for use with LAGARD's Dual-Handed Swingbolt locks.

LAGARD BASIC II USER INSTRUCTIONS [.pdf format] User codes - opening lock, changing the codes, Wrong Try Penalty - four consecutive beeps, Low Battery Warning - repeated audio and visual signal (LED flashing and repeated...)

LAGARD BASIC II MANAGER PROGRAMMING INSTRUCTIONS [.pdf format] CHANGING YOUR CODE - always perform this operation with the door open, enter zero six times, enter existing code, enter new six digit code twice, VALID CODE CHANGE - double signal after valid six digit code is entered, INVALID CODE ENTRY - triple signal and old code is still valid

LAGARD BASIC II KEYPAD INSTALLATION INSTRUCTIONS [.pdf format] MOUNTING ERRORS CAN LEAD TO MALFUNCTIONS!  Consequently we advise as the following: 1. As soon as an electronic lock has been mounted, no more welding can be done on the safe. 2. Keep metal dust, filings, etc. away from the lock. 3. Never remove the lock cover, this voids

LAGARD BASIC II LOCK INSTALLATION INSTRUCTIONS [.pdf format] SAFEGUARDS FOR MOUNTING THE LOCK.  1.  As soon as an electronic lock has been mounted, no more welding can be done on the safe. 2. Keep metal dust, filings etc. away from the lock. 3. never remove the lock cover as it will void warranty policy. 4. Never oil, grease, lubricate or paint the lock.  5. Keep cables away from sharp edges or moving parts. 6. Never carry  Keypads or Locks by holding onto the cable.  7. Use ALKALINE batteries only.

LAGARD LP AUDIT CONTROL CODE INSTRUCTIONS [.pdf format] All locks are shipped from the factory in pre set-up mode, with no features installed.  Pressing the 1 key  will open the lock.  Please follow LP Audit PC Software  instructions to initially  configure locks to default settings.

LAGARD LP AUDIT CUT SHEET [.pdf format] Designed after our popular LGAUDIT® product, the new LPAUDIT® offers all of the features of the LGAUDIT® with some new features added in. With this product you get a Control Code to add/delete/enable and disable the manager as well as retrieve the audit trail. Additionally with this re-designed keypad you have an outside battery compartment for a 9V Alkaline battery. Finally, the LPAUDIT® uses our new eKEYII with improved Dallas chip technology.

LAGARD LP LOCK INSTALLATION INSTRUCTIONS [.pdf format] The quality system of LaGard is ISO 9001 Certified.  In order to maintain this high quality standard and to ensure a problem free application, please read  this guide thoroughly before mounting  the LP Audit lock.  SAREGUARDS FOR MOUNTING

LAGARD LP AUDIT MANAGER INSTRUCTIONS [.pdf format] 4300 Dual-handed swingbolt or 6040-DB Deadbolt Lock Instructions.  Standard features, User codes, Time Delay, Dual code, Signal to disable lock opening, Wrong try penalty, Low battery warning, Audio and visual signal, Audit trail, PC programming features multiple users...

LAGARD LP AUDIT USER INSTRUCTIONS [.pdf format] Feature user codes - Open Lock & Change Code.  Wrong Try Penalty - Four Consecutive Invalid Codes Initiates a Five Minute Delay Period.  Low Battery Warning - Repeated audio and visual signal (LED flashing and repeated beeping)

LAGARD MECHANICAL GROUP 2M OPERATING & CHANGING INSTRUCTIONS [.pdf format] Opening the safe using open index.  Always turn the dial slowly and carefully.  If you turn past a number in the combination while dialing, DO NOT turn the dial  backwards.

LAGARD SAFEGARD CUT SHEET [.pdf format] LA GARD's SAFEGARD product can be used for just about any safe security solution. As the only keypad in our line that offers two 9V batteries with outside access, this is the perfect solution for a high use environment. The SAFEGARD can be used with our Dual-Handed Swingbolt and Redundant Mechanical Locks.

LAGARD SAFEGARD USER INSTRUCTIONS [.pdf format] Please see Manager Instructions for additional features that may be activated on your unit.  FEATURES: USER CODE, WRONG TRY PENALTY, LOW BATTERY WARNING, AUDIO AND VISUAL SIGNAL.  OPENING THE LOCK - 1. Enter valid six (6) digit code.

LAGARD SAFEGARD MANAGER INSTRUCTIONS [.pdf format] 3260/4100 Dual-Handed Swingbolt Lock Instructions.  OPENING THE LOCK - 1. Enter valid six (6) digit code. ...

LAGARD SMARTLINC CUT SHEET [.pdf format] SMARTLINC has arrived! LA GARD's newest product offers such features as multiple lock control, multiple users, time delay, time lock, audit trail and eKEYII access. The SMARTLINC can be used with the Dual-Handed Swingbolt, Deadbolt, Springbolt and Redundant Mechanical Locks.

LAGARD SMARTLINC LOCK INSTALLATION INSTRUCTIONS [.pdf format] The quality system of LaGard is ISO 9001; 2000 approved.  In order to maintain this high quality standard and to ensure a problem free application, please read this guide thoroughly before mounting the SMARTLINC System.  SAFEGARDS FOR MOUNTING

LAGARD SMARTLINC USER INSTRUCTIONS [.pdf format] User operating instructions.  Available Features: USER CODES, MULTIPLE LOCKS, TIME DELAY, DUAL MODE, eKEY II MODE, WRONG TRY PENALITY, LOW BATTERY WARNING, AUDIO AND VISUAL SIGNAL, TIME LOCK

LAGARD SMARTLINC MANAGER INSTRUCTIONS [.pdf format] Manager operating instructions for the Smartlinc lock.  eKEY II MODE - Programmable on each lock, requires code and key.  Available to Manager and Users only, if enabled. Time Lock - Selectable for each lock.  Standard week (4 open periods per day), special events (up to 20 close periods programmable with day and month).

LAGARD SMARTLINC MASTER INSTRUCTIONS [.pdf format] MASTER OPERATING INSTRUCTIONS - Available Features.  Master Code (Factory set to 1-2-3-4-5-6-7-8)  Master code cannot open locks, only control menus and functional abilities - Change Code, Enroll/Delete Locks, Install/Delete Manager, Set Lock Options, Set Time Lock Periods, Access to Master Menu, & Download Audit Information.

LAGARD SMARTLINC MODULE & LOCK SETUP [.pdf format] Opening SMARTLINC Set-up software.  Once all of the software has been installed on the computer, it is time to begin setting up the Logic Module and lock (s).  Open the set-up software.  Using either Windows Explorer or the start button...

LAGARD SMARTLINC SOFTWARE INSTALLATION INSTRUCTIONS [.pdf format] SOFTWARAE INSTALLATION INSTRUCTIONS - The SMARTLINC programming and audit CD is set to autorun when placed in the computer CD-ROM drive.  If the autorun feature does not initiate , select the START button in the lower left hand corner of the window and then choose RUN.

LAGARD SMARTLINC TOTAL AUDIT OPERATING INSTRUCTIONS [.pdf format] TOTAL AUDIT OPERATING INSTRUCTIONS - Total Audit operations master - Retrieve Status Report, Retrieve Lock Configuration, Audit Download, Printing, Export to MS-Excel or to Total Audit (*.taf) file.